Start and Auxiliary Battery Connection Kit

Battery Kit

$349.00

In Stock!

Order Now

What's included

This kit contains two battery disconnect switches, fuses, and all cables required to connect your start and auxiliary batteries to the APDS. Cables have ring terminals preinstalled where they needed to connect to other equipment. Cables can be trimmed to final length on the end that connects to the APDS for a clean installation. No crimp connections required to complete your battery install.

  • 2 x Blue Sea 6006 Battery Switches
  • 2 x Eaton MRBF Fuse Blocks
  • 1 x 75A-150A MRBF Auxiliary Battery Fuse (select at checkout)
  • 1 x 30A-75A MRBF Start Battery Fuse (select at checkout)
  • 1 x Start battery cable - 25 ft 4 AWG cable, red, one 3/8 in (M10) ring terminal
  • 1 x Start battery cable - 25 ft 4 AWG cable, black, one 3/8 in (M10) ring terminal
  • 1 x Start battery disconnect jumper - 3 ft 4 AWG cable, red, two 3/8 in (M10) ring terminals
  • 1 x Auxiliary battery cable - 5 ft 4 AWG cable, red, one 3/8 in (M10) ring terminal
  • 1 x Auxiliary battery cable - 5 ft 4 AWG cable, black, one 3/8 in (M10) ring terminal
  • 1 x Auxiliary battery shunt jumper - 3 ft 4 AWG cable, black, two 3/8 in (M10) ring terminals
  • 1 x Auxiliary battery disconnect jumper - 3 ft 4 AWG cable, red, two 3/8 in (M10) ring terminals

Specifications

  • UL listed, SAE J1127 Type SGT cable
  • Full copper conductor
  • Tin plated copper ring terminals
  • PVC cable jacket is oil, water and abrasion resistant